Lathe tool holder prices in India by code: MCLNR, SVJBR, MWLNR, SER

Shop the tools in this guide

All Lathe Tool Holders →

BVF lists external turning, threading and grooving holders for lathes, in 20x20 and 25x25 mm shanks, right and left hand. The table gives every holder by its ISO code with the insert it takes and its price.

Prices in rupees as on 17 October 2026, shown as before GST / including 18% GST. Each product page always shows the current price, and a GST invoice comes with every order.

Turning tool holder prices by code

Holder code Insert Shank Hand Price
MCLNL 2525 M12 CNMG 12 25x25 Left 550 / 649
MCLNR 2525 M12 CNMG 12 25x25 Right 550 / 649
MCLNL M12 CNMG 12 20x20 Left 500 / 590
MCLNR M12 CNMG 12 20x20 Right 500 / 590
MDJNL 2525 M15 DNMG 15 25x25 Left 550 / 649
MDJNR 2525 M15 DNMG 15 25x25 Right 550 / 649
MDJNL M15 DNMG 15 20x20 Left 500 / 590
MDJNR M15 DNMG 15 20x20 Right 500 / 590
MTJNL 2525 TNMG 16 25x25 Left 550 / 649
MTJNR 2525 TNMG 16 25x25 Right 550 / 649
MTJNL 2020 TNMG 16 20x20 Left 500 / 590
MTJNR 2020 TNMG 16 20x20 Right 500 / 590
SVJBL 2525 M16 VBMT 16 25x25 Left 550 / 649
SVJBR 2525 M16 VBMT 16 25x25 Right 550 / 649
SVJBL M16 VBMT 16 20x20 Left 500 / 590
SVJBR M16 VBMT 16 20x20 Right 500 / 590
MWLNL 2525 M08 WNMG 08 25x25 Left 550 / 649
MWLNR 2525 M08 WNMG 08 25x25 Right 550 / 649
MWLNL M08 WNMG 08 20x20 Left 500 / 590
MWLNR M08 WNMG 08 20x20 Right 500 / 590
SER 2525 M16 16ER Threading 25x25 Right 550 / 649
SER M16 16ER Threading 20x20 Right 500 / 590
TTER 25x25 T15 2 mm Grooving 25x25 Right 800 / 944
TTEL 25x25 T15 2 mm Grooving 25x25 Left 800 / 944
TTER 25x25 T15 3 mm Grooving 25x25 Right 800 / 944
TTEL 25x25 T15 3 mm Grooving 25x25 Left 800 / 944
TTER 25x25 T15 4 mm Grooving 25x25 Right 800 / 944
TTEL 25x25 T15 4 mm Grooving 25x25 Left 800 / 944

How to read the code

In a code like MCLNR 2525 M12, the first letters give the clamping system and insert shape, R or L is the hand, 2525 is the shank size in mm and the last part is the insert size. The full key is in How to read a turning holder code, and Which insert fits which turning holder? pairs each holder with its insert.

How to choose

  • Shank: match your lathe's tool post. 25x25 is common on medium lathes, 20x20 on smaller ones.
  • Hand: R (right hand) and L (left hand) holders cut in opposite directions; R is the usual choice for turning towards the chuck.
  • Insert: buy the insert family named in the table (CNMG 12, DNMG 15, TNMG 16, VBMT 16, WNMG 08, 16ER threading or T15 grooving).

Related collections

Back to blog